Main parameters

1.Maximum drilling diameter φ10mm

2. Maximum end milling diameter φ8mm

3. Maximum end milling diameter φ20mm

4. Maximum tapping diameter M4

5. Spindle speed range (stepless), at 50HZ: 400r/m--4000r/m; at 60HZ: 400r/m--4000r/m

6. Spindle sleeve diameter φ30mm

7. Column diameter φ32mm

8. Spindle head ER16

9. The distance from the spindle center line to the column surface is 115mm

10. The distance between the spindle end face and the work table is 0mm-160mm

11. Spindle sleeve manual lifting amount 25mm

12. The feed amount per revolution of the spindle micro-feed handwheel is 1.0mm/revolution.

13. Spindle micro-feed handwheel scale value 0.05mm/div

14. The longitudinal (X-axis) movement distance of the worktable is 160mm

15. The horizontal (Y-axis) movement distance of the worktable is 70mm

16. Workbench longitudinal screw (X-axis) M8x1.25mm

17. Workbench transverse screw (Y-axis) M8x1.25mm

18. The feed amount per revolution of the longitudinal (X-axis) handwheel of the workbench is 1.25mm.

19. The scale value of the handwheel in the longitudinal direction of the workbench (X-axis) is 0.05mm/div.

20. The feed amount per revolution of the horizontal (Y-axis) handwheel of the workbench is 1.25mm.

21. The horizontal (Y-axis) handwheel scale value of the workbench is 0.05mm/division

22. The longitudinal (X-axis) automatic feed of the workbench is 15mm/min.

23. Workbench size 300mm*90mm

24. Number of T-slots on the workbench: 3

25. Workbench T-slot width 10mm

26. The distance between T-slots on the workbench is 25mm.

27. Main motor 350W, 230V/115V, 50HZ/60HZ, 1.5A/3.0A, 16000r/16000r/min

28. Net weight/gross weight 7kg/9kg

29. Overall dimensions: 360mm*250mm*250mm

30. Packing size 40cm*30cm*30cm (carton)

appendix:

1. ER16 collet φ3mm, φ4mm, φ5mm, φ6mm, φ8mm, φ10mm, φ12mm, wrench

2. 2-inch (50mm) flat-nose pliers

3. φ1mm-φ10mm drill chuck, key and adapter

4. Tool box, matching wrench, oil can